Function of machine vision inspection equipment in electronic components industry

With the continuous improvement of machine vision technology, the development trend of machine vision inspection equipment is getting better and better, and it has been recognized by enterprises in all walks of life. So what are the functions of machine vision inspection equipment in the electronic components industry? Let's learn more about it:

1. Vertical detection function

Opposite diagonal detection, notch detection, concentricity detection, inner and outer diameter detection, multiple aperture detection, shaped nut detection, chamfer detection, tooth number detection, surface crush detection, solder joint area detection, burr in the hole, shaped stamping part detection, shaped hardware detection, fluid accumulation in the hole, cross slot plug detection, side crack detection, head text, shape detection, etc.

2. Level detection function

Multi-section width detection, multi-section height detection, multi-gasket, less gasket detection, solder joint height detection, etc.

3. Horizontal screw detection function

Bottom shape, screw inner and outer diameter detection, tooth distance, tooth Angle detection, perpendicularity detection, bad rubbing, tooth quality detection, etc.

4. Head detection function

Broken needle, slot depth detection, multi-section width detection, head height detection, step height detection, head diameter detection, head thickness detection, head cracking detection, etc.

5. Select a function

Rod length detection, tooth outer diameter detection, tooth base diameter detection, pitch detection, oblique tooth detection, inner hole diameter detection, inner hole impurity detection, solder joint size and number detection, whether there are teeth detection, step size detection, tooth injury detection, hole burr detection, card detection, etc.