Common industrial camera cable interface

Different types of industrial camera cables, suitable for different products, the following Xinxiwang to introduce the common industrial camera cable interface:

1.USB port

USB interface camera is a digital camera, directly output digital image signal. The full name of USB is Universal Serial Bus (Universal Serial Bus). The USB interface is 4 pins, of which 2 are power cables and 2 are signal cables. USB is a serial interface, hot swappable, easy to connect. USB2.0, transmission speed 480Mbps, communication distance 5m, 80% of the bandwidth for image transmission. USB3.0, transmission speed 4.8Gbps, communication distance 10m, 80% of the bandwidth for image transmission. Because the USB interface camera is easy to use and has a wide range of interfaces, it is widely used in microscopy, scientific research experiments, portable equipment and other industries.

2. Interface Camerlink

The digital image signal communication Interface Protocol, introduced by the AIA Association, is a serial communication protocol. Using LVDS interface standard, it has high speed, strong anti-interference ability and low power consumption. Developed from Channel link technology, some transmission control signals are added on the basis of Channel link technology, and some related transmission standards are defined. The protocol adopts MDR-26-pin connector or SDR-26-pin connector, which has the characteristics of high speed, bandwidth up to 6400Mbps, strong anti-interference ability and low power consumption.

3.Gige Gigabit Ethernet interface

Created and promoted by the AIA (Automatde Imaging Association), it is a camera interface standard based on the Gigabit Ethernet communication protocol. Suitable for industrial imaging applications, transmitting uncompressed video signals over the network. It is a standard for transmitting images over long distances using inexpensive cables.

4.CoaXPress

CoaXPress is an asymmetric, high-speed point-to-point serial communication digital interface standard with transmission speeds of up to 6.25 Gbps and transmission distances of more than 100m. Large data transmission, long transmission distance, optional transmission distance and transmission volume: from 50m@6.25Gbps to 170m@1.25Gbps, low price, easy integration, support hot swap.

5.IEEE1394---- Firewire interface

The 1394 interface, also known as "FireWire", is used to connect digital products to computers and other machines. IEEE1394 bus is a high-speed serial bus, 1394a* high transmission speed of 400Mbps, 1394b the highest transmission speed of 800Mbps. IEEE1394 supports hot swap, real-time data transmission, bus structure, plug and play. 1394 interface is divided into 4 core and 6 core, 4 core has two pairs of data lines, 6 core in addition to the data line also includes a group of power cables to supply power to external equipment. IEEE 1394 interface, without the need for a controller, can achieve peer-to-peer transmission, 1394a maximum transmission distance of 4.5 meters, 1394b transmission distance is usually 10 meters, in the case of reduced data rate can be extended to 100 meters (100 MBPS), the use of relay equipment support can further improve the transmission distance.