Maintenance of machine vision inspection equipment

In order to prevent equipment performance deterioration or reduce the probability of equipment failure, in the process of using machine vision inspection equipment, it is necessary to maintain machine vision inspection equipment. At the same time, you can also call our service hotline: 028-62705808

1. In order to prevent the risk of corrosion or high-voltage electric shock of the equipment, it is forbidden to seep water on the equipment during the operation of the equipment.

2. Regularly maintain the damage of spare parts such as laminated glass plates, vibrating plates and guide rail sliders, and whether it is necessary to adjust their gaps or replace them with new parts.

3. The installation and application of the equipment in the natural environment should be at indoor temperature and room temperature. High temperature, high and low temperature, acidity and alkalinity natural environment will endanger the service life of machine vision inspection equipment

Productivity.

4. The indexing disc electron-optical testing equipment needs to be filled with grease to the cam splitter on time to prevent damage due to less oil.

5. The processing plant should set up technical professional and technical personnel to manage the method machine vision inspection equipment, and do not allow laymen to adjust the camera casually to prevent harm to the accuracy of the inspection.

Economic benefits.

6. Regularly maintain whether there is ice in the filter device to keep the filter device dry.

7. When cleaning the equipment, it is necessary to pay attention not to use special tools that will destroy the surface of mechanical equipment, such as steel brushes, and do not need to use corrosive acid solutions and plastic special tools.

8. Regularly maintain the contact status of the electrical equipment route, whether the cable is broken and embrittle, and remove the dust in the motor such as the I control computer to prevent the equipment from operating normally.

9. The equipment must be cleaned on time, and the camera lens must be scrubbed on time with a dust-free cloth. Apply rust inhibitor to each component on time to prevent corrosion.

Chengdu Xinxiwang is a supplier focusing on machine vision inspection equipment and machine vision system solutions, providing you with solutions in the field of machine vision such as machine vision automatic inspection technology, 3D vision positioning, dimensional measurement, defect detection, printing inspection, non-standard inspection, quality inspection machine, optical screening machine, machine vision algorithm and R&D application. At the same time, it has its own core products: high-precision alignment system, AOI detection system, code reading-automatic posting system, BC system (equipment line control system Block Control System), which improves the automation level and product quality of the customer's factory.